100A MPPT Solar Panel Battery Regulator Charge Controller Automatic

100A MPPT Solar Panel Battery Regulator Charge Controller Automatic Identify US Ship within 24 hours. 100% New & Excellent Quality Strictly QC, Each item was fully checked before shipping FREE & FAST Shipping delivery with Tracking Number Feature： - Advanced maximum power point tracking (MPPT/PWM) technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. - Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. - Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat. - Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller. - Real-time display of temperature, charging current and discharge current. Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking. Specifications: Name: LCD screen solar controller Voltage: DC 12V / 24V Display: LCD screen Self-consumption: <10MA Overcharge protection: 14.4V / 28.8V Overcharge Float charge: 13.7V / 27.4V Charge recovery voltage: 12.6V / 25.2V Over discharge protection: 10.7V / 21.4V Over discharge recovery: 12.6V / 25.2V Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.) Working temperature: -35 ℃ -60 ℃ 12V fits 18V solar panel, 24V fits 36V solar panel 12.0 volt lead acid battery corresponding The float voltage is set to: 13.6 The recovery discharge voltage is set to: 12.6 The discharge cut-off voltage is set to: 10.7 12.8 volt lithium iron phosphate battery corresponding The float voltage is set to: 14.6 The recovery discharge voltage is set to: 13.6 The discharge cut-off voltage is set to: 11.0 11.1 volt lithium battery corresponding The float voltage is set to: 12.6 The recovery discharge voltage is set to: 11.6 The discharge cut-off voltage is set to: 9.6 The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available). PV system power Description: 10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 12V photovoltaic system: power is respectively 100-1000W 10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 24V photovoltaic system: power is respectively 200-2000W Package Included: 1X Solar Panels Battery Charge Controller 1X User Manual ======================================================================== Features: 1.Build-in industrial micro controller. 2.Big LCD display,all adjustable controlling parameter of the system. 3.Fully 4-stage PWM charge management. 4.Build-in all necessory protections including short-circuit protection,open-circuit protection,reverse protection,over-load protection. 5.Dual mosfet Reverse current protection ,low heat production LCD display/key and Operations: MENU:Switch between different display,or to enter/exit setting by long press. UP: Press to increase value. DOWN:Press to decrease value. System Connection: 1.Connect the battery to the charge regulator - plus and minus. 2.Connect the photovoltaic module to the regulator - plus and minus. 3.Connect the consumer to the charge regulator - plus and minus. *The reverse order applies when deinstalling! *An improper sequence order can damage the controller! Attention: 1.press the [Down] button to ON/OFF load manully at main display. 2.the work mode is working as below: [24H] load output 24hours [1-23H] load on after sunset and closed after setting hours [0H] Dusk to dawn 3.Batteries:Only fit for OPEN, AGM, GEL 4.The charge regulator is only suitable for,regulating solar modules Never connect another charging source to the charge regulator. 5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation. Specifications: Load: Light Control MPN: RBL Charging Mode:PWM Model:RBL-60A System Voltage:12V 24V Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery) Max input power: 650W(12V system); 1300W(24V system) Equalization:12.6V(sealed) 14.2V(Gel) 14.6V(flood) Float charge:13.7V(defaul,adjustable)，12.0-15.0V Discharge stop voltage:10.7V(defaul,adjustable)，9.0-11.5V Discharge reconnect voltage:12.5V(defaul,adjustable)，11.0-13.0V Rated current: 60A Self-consume:<10mA Batteries:Only fit for OPEN, AGM, GEL Operating Temperature:-35℃~60℃ USB output:5V/2A Max Dimension:13.4*7*3.3cm Package includes: 30A/60A Solar Charge Controller*1 User Manual*1 ======================================================================== Feature： -Automatic Identification System Voltage,12V/24V auto recognition. -Completed technical data for setup and modify. - The load control mode can be selected， the timer function canbe reset for street light at night. -Discharge capacity control& Discharge Counter of Ampere Hour. -Working Storage Function： record the total run time of system,Record timers of error during running time， record times of full charged battery. -Solar Panels， Battery， Solar Charge Controller positive poles areall connected together， adopting negative MOSFET in series control circuit. -LCD display &Double Button Operation :high-definition display device status. -Dual USB 2.4A fast charging ports, pure copper wiring port with good conductivity. -Six intelligent safety protection&stable output, rapid operation :Efficiency increased by 30% with high voltage protection, short circuit protection, reverse connection protection, temperature protection, overload protection, low voltage protection. -Alloy heat dissipation backplane fast heat dissipation: prevent the device from running for a long time to cause the circuit to heat up. -Widely used: RV solar panel power supply in the car, solar panel large-scale power generation system, solar panel environmental protection street light, yachts and ships. Specification： Charging Mode:MPPT Model：30/50/70A System Voltage：12V/24V Max Input Voltage of solar panel:55V Self-consumption≤10mA Max charge current: 30/50/70A Max discharge current: 30/50/70A LVD:11.0V ADJ 9V…12V,x2/24V LVR:12.6V ADJ 11V…13.5V,x2/24V Float Voltage:13.8V ADJ 13V…15V,x2/24V Boost charging:14.4V, *2/24V Battery Voltage less than 12V start boost charging 2 hours Battery Over Voltage:16.5V,×2/24V Reverse Connection Protection:yes Load Over Current Protection:Yes， each two minutes restart once Temperature Compensation:-24 mV /℃ for 12V system， x2/24V Working Temperature：-20℃…+55℃ Waterproof grade:IP32 USB:5V 2.1A DC output:12V/24V Current display:YES Package including： 1*Charge Controller 1*Manual Feedback Delivery details Terms of sales About us Contact us Feedback Contact us if you have any question, Give us a chance to serve you,No negative feedback, it will not solve the problem! Thanks! communication Please! Delivery details Fast Shipping fro m NJ-U S A Terms of sales About us Contact us Welcome ! Pls email us by clicking contact the buyer or ask a question. On Sep 19, 2022 at 20:38:06 PDT, seller added the following information:

Returns Accepted for this item if it's within 60 Days