10A-100A Solar Charge Controller 12V/ 24V/36V/48V Solar Panel

10A-100A Solar Charge Controller 12V/ 24V/36V/48V Solar Panel Regulator Dual USB [Upgraded] MPPT - 100A-12V/24V/36V/48V Feature: ✔ LCD Liquid Crystal Display: The solar charging controller adopts an LCD liquid crystal display with backlight display, which can be clearly and intuitively displayed in the dark, one-key operation of the panel keys can adjust various system control parameters, such as float charging voltage, boost charging voltage, light control and time delay, etc. ✔ Multiple Operating Modes: This solar charge controller has seven operating modes, such as charging mode, light control mode, light and time delay control mode, universal control mode, manual control mode, timing control mode and testing mode, among them, test mode is only available to the factory test. ✔ Large-section Wiring Port: Use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses. ✔ Dual USB Charging Ports: The solar charge controller adopts a dual USB charging port design, which can charge two devices at the same time, and supports most of USB port devices, such as mobile phones, tablets, PSP game consoles, etc. ✔ Thickened Aluminum Alloy Heat Sink: The MOS tube is used to lock the heat sink design, the heat dissipation is more uniform, and there is no fear of the temperature rise caused by the MOS tube, the powerful heat dissipation capacity can operate normally in the environment of 55 ℃, at the same time, it is equipped with functions to prevent overcharge, overvoltage, DC output low voltage, high voltage protection and reverse polarity protection, etc. Specification: Model: SY- 12/24/36/48V100A Colour: Black Maximum charging current: 100A Maximum input voltage of photovoltaic panels: 23V (12V), 45V (24V), 69V (36V), 90V (48V) Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V) Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USB Working temperature: -25℃~55℃ Cooling method: heat sink self-cooling Charging method: Focused MPPT modulation charging Working mode: seven Protection function: prevent overcharge, overvoltage/DC output low voltage, high voltage protection, reverse polarity protection, etc. Product size (L*W*H): 195*183*68mm/7.68*7.20*2.68inch Package size (L*W*H): 205*205*70mm/8.07*8.07*2.76inch Package includes: 1 x Solar Charge Controller 1 x Manual 1 x Packing Box MPPT/PWM - 100A/80A/60A/30A/10A Features: -Build- in industrial micro controller. -Big LCD/LED display ,charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. -Fully 3-stage charge management ,PWM battery charging as well as MPPT solar charge controller. -Build -in short-circuit protection ,open-circuit protection,reverse protection,over-load protection. -Dual USB output,the maximum current of 2.5A,to support Apple’s mobile phone charging . -Dual reverse current protection ,low heat production. Specification: Rated voltage:12V/24V Charging Mode:PWM MPPT Rated current : 100A/80A/60A/30A/10A Max PV VOTAGE:50V Max PV input Power:360W(12V) 720(24V) colour: orange Material: Plastic size: 133x70x35mm/5.24”*2.76”*1.38” Display: LCD screen Self-consumption: <10MA Overcharge protection: 14.4V / 28.8V Overcharge Float charge: 13.7V / 27.4V Charge recovery voltage: 12.6V / 25.2V Over discharge protection: 10.7V / 21.4V Over discharge recovery: 12.6V / 25.2V Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.) Working temperature: -35 ℃ -60 ℃ 12V fits 18V solar panel, 24V fits 36V solar panel 12.0 volt lead acid battery corresponding The float voltage is set to: 13.6 The recovery discharge voltage is set to: 12.6 The discharge cut-off voltage is set to: 10.7 12.8 volt lithium iron phosphate battery corresponding The float voltage is set to: 14.6 The recovery discharge voltage is set to: 13.6 The discharge cut-off voltage is set to: 11.0 11.1 volt lithium battery corresponding The float voltage is set to: 12.6 The recovery discharge voltage is set to: 11.6 The discharge cut-off voltage is set to: 9.6 The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available). PV system power Description: 10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 12V photovoltaic system: power is respectively 100-1000W 10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 24V photovoltaic system: power is respectively 200-2000W Package included: 1 x Solar Controller 1 x manual Payment Delivery details About us Contact us Payment
Please send the payment soon, then we can ship out your order soon. Delivery details
Shipped by USPS from NJ, US About us
muchl_95 is a online wholesale seller for all kinds of electronic accessories. We carry a wealth of consumer electronic accessories, such as computer peripherals, laptop accessories, game consoles accessories, cell phones accessories, digital cameras accessories and other electronic. Contact us
Any question, welcome to contact us. On Jul 20, 2023 at 07:31:51 PDT, seller added the following information:

Returns Accepted for this item if it's within 60 Days