12V 100W / 150W(Flexible) : 100W/150W Solar Panel 12V Charger Battery Charger Kit Maintainer Boat RV Car Features: This solar panel photovoltaic packs 100W of power yet is only 11inch x 11inch, making it easier to mount, transport, hang, and remove. Multiple protection, portable, reliable charger: With overcharge and reversal drain protection modules, convenient to use the 11inch Eco-Worthy solar trickle charger with various vehicle, RV, Camper, Tractor, Boat, etc. With a semi-flexible design , you can bent the solar panel appropriately to suit a wider range of applications. The solar panels comes with high conversion rate, high stability and good durability. It has a single crystal chip and can be used in any place and situation like automobiles, homes, boat, motorcycles, etc. With the strong sun in the summer, the solar panel can efficiently convert solar energy. The solar panels can withstand all kinds of environments with high waterproof performance. Anti-scratch, non-foaming, easy to clean. Safety Instructions: 1: How to install it? 1.Battery 2.Solar panels 3.Load 2: Please install the charger controller on a flat, well-ventilated place (indoor) 3: The LCD screen has an error of 0.2V to 0.3V, but this is normal. 4: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. 5: This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power. Specification: Solar Panel Power: 100W/150W Solar Cell: S ingle C rystal S ilicon Size: 100W: 11 X 11 inch; 150W: 6 X 8.66 inch Solar Panel Operating Voltage: 12V Solar Panel Open Circuit Voltage: 21.6V Solar Panel Short Circuit Current: 1.11A (Maximum) Length of 10 in 1 Data Cable: 9 in Length of Alligator Clips Cable: 30.7 in Length of Cigarette Lighter Plug Cable: 29.5 in J-Box IP Rating: IP65 Application: Mobile Working Temperature: -40℃ to +80℃(-40°F to +176°F) Features: Integrated voltage regulator module, 5V dual USB voltage regulator output Product Usage: Mobile phone, motion camera and other 5V equipment charging, car, boat and other 12V car battery charging 18V 100W(Rigid) : Heavy Duty Solar Panel 100W 18V Monocrystalline Waterproof Panel for Charging 18V Battery of RV Boat Trailer ATV Car or Powering 18V Light, Charing 18V Battery Pack and Other Off-Grid Applications High Efficiency Features: 【High Efficiency】 100W monocrystalline solar panel with a high conversion efficiency of up to 21%. Bypass diodes can ensure excellent performance in low-light environments. Perfect for off grid 12 volt battery charging system and a variety of DC applications. 【Long Lifespan】 Advanced encapsulation material with multi-layered sheet lamination enhance cell performance and provide a long service life. Guaranteed positive output tolerance (0-3%). EL testing for all solar modules, guaranteed no hot spots. 【Durable】 18V solar panel withstands high wind and snow load . Corrosion-resistant aluminum frame and tempered glass are for extended outdoor use, allowing the solar panels to last for decades. 【Easy Installation】 The pre-drilled holes on the back of panels are for fast mounting and securing. Fits for different mounting systems such as Z-brackets, pole mounts, and tilt mounts(Not Included). 【Outstanding Quality】 100W latest upgraded solar module improves conversion efficiency, reduces cells loss, and extends panel life. Excellent performance is also ensured in a low-light environment. Using Tempered glass, weatherproof film, and aluminum frame for excellent extended outdoor use, which can withstand storms for more than 10 years. 【Wide Application】 It can be used as a solar battery charger and maintainer for different 18V DC batteries, such as Wet, Gel, MF, EFB, and AGM. A variety of scenarios for RV, car, boat, marine, camper, lawnmower, motorcycle, jet ski, water pump, shed, gate opener, etc. Upgraded Solar Charger Controller : Upgraded Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display, Fits for Lithium Iron Phosphate Battery, Lead Acid Battery, Lithium Battery Solar Panel (30A) Description: The solar charge controller is a kind of intelligent, multi-purpose solar charge and discharge controller. Solar Charge Regulator can fully meet your home Photovoltaic system (including home lighting system) requirements. Features: 【Upgraded S olar P anel C ontroller】 Charge controller build-in industrial micro controller for automatically management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. Fits for 12V/24V system. 【Scope of A pplication】 The 12v solar charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries. Dual USB output, the maximum current of 2A, to support mobile phone charging. 【Safe to U se】 Charge controllers for solar panels with Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. 12v solar charge controller takes fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery. 【LCD D isplay】 Solar controller 12v with big LCD display, you can also switch modes and adjustable parameter, clearly indicate the status, suitable for home, industrial, commercial etc. 【Wide Compatibility】 The Solar Charge Controller is automatically Fits for 12V or 24V systems and is suitable for a variety of batteries: lead-acid batteries, lithium iron phosphate batteries, and ternary lithium batteries. 【Notice】 The 12 volt charge controller should connect the battery first, then the solar panel, and finally the load! Please strictly follow the above order to access, otherwise it may damage the controller or other components; the disassembly sequence is contrary to the wiring order. Connection Steps: 1. Connect the battery to the charge regulator. 2. Connect the solar panels to the charge regulator. 3. Connect the consumer to the charge regulator. NOTE: The reverse order applies when deinstalling. The wrong connection sequence will damage the controller. Safety Instructions: The LCD screen has an error of 0.2V to 0.3V, but this is normal. The solar charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL, not suitable for nickel hydride, lithium, lithium ion or other batteries. This controller can only use photovoltaic panels as charging power. Do not use DC or other power as charging power. Specification: Battery V oltage: 12V/24V Charge C urrent: 30A Discharge C urrent: 10A Max Solar I nput: <50V Compatible Solar Panel Battery Type: Lithium Iron Phosphate Battery, Lead Acid Battery, Lithium Battery Float Charge: 13.7V ( default , adjustable) Discharge Stop: 10.7V ( default , adjustable) Discharge Reconnect: 12.6V ( default , adjustable) USB O utput: 5V/1.2A Operating T emperature: -35~+60℃ Size: 5.2 x 2.7 in Make sure the battery has sufficient voltage for the controller to recognize the battery before the first installation. Note s : Due to the light and monitor difference,the item's color may be slightly different from the pictures. Please allow 1 inch differs due to manual measurement. If you have any problems with our product, please contact with us first, we will solve it for you within 24 hours. Package Includes: 1 X Solar Panel (Flexible) 1 X Crocodile Clip 1 X Car Plugs 1 X 10 in 1 Data Cable 2 X Carabiners 4 X Suction Cup OR 1 x Solar Charge Controller OR 1 x 100W Tempered Glass Solar Panel With Aluminous Frame (Rigid) Pls Note: Different Goods has different price. Thanks Seller Guarantee: Brand-new and Good Quality Item Located: New Jersey, United States Handling Time: 2 Working Day Fast and Free Shipping: 2 to 5 Working Days 30 Days Free Returns
Returns Accepted for this item if it's within 30 Days