200 Watts 12/24 Volts Monocrystalline Panel Solar RV Kits with 20A PWM

200 Watts 12/24 Volts Monocrystalline Panel Solar RV Kits with 20A PWM LCD Charge Controller/Mounting Brackets/Y Connectors/Solar Cables/Cable Entry Housing (2X100W Kit)

2PCS ACOPOWER 100-Watt monocrystalline solar panels can be connected in parallel by branch connectors or connected in series without any connectors;

20A PWM Charge Controller: 8 Battery Type Compatible -Lithium-ion, LiFePO4, LTO, Gel, AGM, Flooded, Crystal and Calcium. 20 amps 12V/ 24v auto continuous charging capacity, enables use of up to 12V/360watts, 24V/720watts. Please check the detail with the ASIN: B07S8951WC

Designed for RVs, cabins, homes, boats, back-up and remote power use. The two solar panels can be wired in parallel for 12V battery charging or in series for 24V battery charging.

Complete kit includes: (1)2PCS ACOPOWER 100 Watt 12 Volt Solar Panel (2)20A PWM Waterproof Charge Controller(3)30ft 10AWG Solar Adaptor Kit (4) 8ft 10AWG Tray Cable(5) Cable Entry Housing (6)1 Pair T/Y Branch Connectors

25-year transferable power output on panels and 1-year on rest of the kit components

Product Description
12V/24V Solar System Designed for off-grid use with the ability to easily charge most 12V batteries: Gel Sealed Flooded (Wet Cell) Lithium Ion
ACOPOWER 200W Solar Panel Kit | 20A PWM Charge Controller
This 200W Solar Kit is designed with off-grid in mind. Suitable to mount on RVs, green homes, cars, and boats. Solar Module: 2PCS 100W Monocrystalline MPPT Charge Controller: 20A PWM charge controller Cables: 1 pair 30ft 12AWG cable with female/male connector to connect to the charge controller; 1 pair 8FT 8AWG Tray Cable to connect the charge controller to your battery; Mounts and cable Entry housing: 2 sets of z-brackets and 1PC waterproof cable Entry housing 1 Pair PV T/Y Connectors
How to properly set up a basic system First
, the battery should be hooked up to the charge controller. You could use our tray cable or any general stranded copper core wire to connect the two. Make sure that you lead the wire into the battery terminal of the charge controller and match the + and – to the battery + and -. Make sure to screw in the exposed wire tightly inside the controller terminal. Then screw on the battery rings to the battery. Second
, then connect your solar panel to your charge controller. We recommend that you connect the adapter kit to your panel first, then follow the + or – sign coming off of the leads of the panels and match it with the + and – sign on the charge controller. Be careful at this step, because if the panel is inserted incorrectly, you can have reverse polarity and short the system causing damage to the panels or controllers. Lastly
, you can hook up your inverter to your battery by using battery ring cables and by matching the + to + and – to -.
100W Mono Solar Panel
S pecification Peak Power (Pmax):100W Peak Circuit Voltage(Voc):22V Max Power Voltage(Vmp):17.48V Short Circuit Current(Isc):6.14A Max Power Current(Imp):5.71A Wind resistance:2400pa Weight:12.8 lb Dimension:40.2*20.1*1.4 Inch Application Class:Class A
20A PWM Solar Panel Nominal Voltage: 12 V/ 24V DC Rated Charge Current: 20A Max. PV Input Voltage: 50V Battery Start Charging Voltage: 3V Temperature Compensation Coefficient: -24mV/°C Operating Temperature: -40°F to 140°F Storage Temperature: -40°F to 185°F IP Enclosure Grade: IP65 Dimensions: 5.59x 3.7x 1.06 inches
Z Brackets
2 Set Mounting Z Brackets
Cables and Housing
1 Pair 30ft 12AWG PV Cable with female/male connector
1 Pair 8FT 8AWG Tray Cable
A waterproof cable Entry housing
1 Pair PV T/Y Connectors 100W Solar Panel 1PC 2PC 2PC 3PC 4PC 5PC Charge Controller 20A PWM 20A PWM 30A MPPT 30A MPPT 40A MPPT 40A MPPT 30FT PV Cable ✓ ✓ ✓ ✓ ✓ ✓ 8FT 8AWG Tray Cable ✓ ✓ ✓ ✓ ✓ ✓ Cable Entry housing ✓ ✓ ✓ ✓ ✓ ✓ Z Brackets 1 Set 2 Set 2 Set 3 Set 4 Set 5 Set 100W Solar Panel 6PCS 8PCS Charge Controller 50A MPPT 60A MPPT 30FT PV Cable ✓ ✓ 8FT 8AWG Tray Cable ✓ ✓ Cable Entry housing ✓ ✓ Z Brackets 6 Sets 8 Sets Item model number HY-SPKM-200W20A Color 0 Ah Product Dimensions 40.2 x 20.1 x 1.4 inches; 26.46 Pounds Material Polycarbonate Country of Origin Vietnam Item Weight 26.46 Pounds Efficiency High Efficiency Item Dimensions LxWxH 40.2 x 20.1 x 1.4 inches Size 200W PWM20A Shipping

Fast shipping is very important for us.

Our standard US shipping service is FREE.

Your order will be shipped within 2-3 business days upon full payment received.

Your order will be delivered within 2-3 business days after the handling time.

We only ship to the confirmed PayPal address. We reserve the right to cancel any order for any reason at any time.

We are not responsible for undeliverable addresses.

Returns and payment

We offer a 30 days return policy from checkout winning date.

We allow only PayPal as payment method

FeedBack Your feedback very important to us, after you get your package and you are satisfied with our service

please leave us positive feedback

If you have any problem with your order / any questions please before leave any type of feedback

For any questions, using Pricetronic contact system Please visit our Pricetronic store to check out other items for sale! Thank you for shopping at our store.

Returns Accepted for this item if it's within 30 Days