30-60A PWM Solar Panel Regulator Battery Charger Controller 12/24V
With LCD USBUSD $14.97
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
60A Solar Charge Controller Battery Solar Panel Regulator LCD 12V/24V Auto USB ★ No Restocking fee ★ 100% New & Excellent Quality ★ Timely updated tracking number ★ Local Fast & Expedited shipping From NJ, USA. ★ Strictly QC, Each set was fully tested before shipping Features:
1.Build-in industrial micro controller.
2.Big LCD display,all adjustable controlling parameter of the system.
3.Fully 4-stage PWM charge management.
4.Build-in all necessory protections including short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production LCD display/key and Operations:
MENU:Switch between different display,or to enter/exit setting by long press.
UP: Press to increase value.
DOWN:Press to decrease value. System Connection:
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3.Connect the consumer to the charge regulator - plus and minus.
*The reverse order applies when deinstalling!
*An improper sequence order can damage the controller! Attention:
1.press the [Down] button to ON/OFF load manully at main display.
2.the work mode is working as below:
[24H] load output 24hours
[1-23H] load on after sunset and closed after setting hours
[0H] Dusk to dawn
3.Batteries:Only fit for OPEN, AGM, GEL
4.The charge regulator is only suitable for,regulating solar modules Never connect another charging source to the charge regulator.
5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation. Specifications:
Load: Light Control
MPN: RBL
Charging Mode:PWM
Model:RBL-30A
System Voltage:12V 24V
Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery)
Max input power: 390W(12V system); 780W(24V system)
Equalization:12.6V(sealed) 14.2V(Gel) 14.6V(flood)
Float charge:13.7V(defaul,adjustable)，12.0-15.0V
Discharge stop voltage:10.7V(defaul,adjustable)，9.0-11.5V
Discharge reconnect voltage:12.5V(defaul,adjustable)，11.0-13.0V
Rated current: 30A
Self-consume:<10mA
Batteries:Only fit for OPEN, AGM, GEL
Operating Temperature:-35℃~60℃
USB output:5V/2A Max
Dimension:13.4*7*3.3cm Package includes:
1x Solar Charge Controller
1x User Manual Payments Delivery details Return and exchange Feedback & Rating Contact us Payments Payments: Paypal, Google Pay, Visa, Master Card, Amerian Express, Discover. Delivery details All items are shipped from US warehouse located at NJ . We ship to your eBay or Paypal address. Please make sure your eBay or Paypal address is correct before you pay. Return and exchange Free return Feedback & Rating Pls contact our customer service firstly if have any problems , we will help to solve the issue, and could offer free return service for full refund or free replacement after confirming. You can buy from us with confidence Contact us If have any problems, please feel free to contact us.
1.Build-in industrial micro controller.
2.Big LCD display,all adjustable controlling parameter of the system.
3.Fully 4-stage PWM charge management.
4.Build-in all necessory protections including short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5.Dual mosfet Reverse current protection ,low heat production LCD display/key and Operations:
MENU:Switch between different display,or to enter/exit setting by long press.
UP: Press to increase value.
DOWN:Press to decrease value. System Connection:
1.Connect the battery to the charge regulator - plus and minus.
2.Connect the photovoltaic module to the regulator - plus and minus.
3.Connect the consumer to the charge regulator - plus and minus.
*The reverse order applies when deinstalling!
*An improper sequence order can damage the controller! Attention:
1.press the [Down] button to ON/OFF load manully at main display.
2.the work mode is working as below:
[24H] load output 24hours
[1-23H] load on after sunset and closed after setting hours
[0H] Dusk to dawn
3.Batteries:Only fit for OPEN, AGM, GEL
4.The charge regulator is only suitable for,regulating solar modules Never connect another charging source to the charge regulator.
5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation. Specifications:
Load: Light Control
MPN: RBL
Charging Mode:PWM
Model:RBL-30A
System Voltage:12V 24V
Max Solar input(Solar Panel):36V(24V battery) 18V(12V battery)
Max input power: 390W(12V system); 780W(24V system)
Equalization:12.6V(sealed) 14.2V(Gel) 14.6V(flood)
Float charge:13.7V(defaul,adjustable)，12.0-15.0V
Discharge stop voltage:10.7V(defaul,adjustable)，9.0-11.5V
Discharge reconnect voltage:12.5V(defaul,adjustable)，11.0-13.0V
Rated current: 30A
Self-consume:<10mA
Batteries:Only fit for OPEN, AGM, GEL
Operating Temperature:-35℃~60℃
USB output:5V/2A Max
Dimension:13.4*7*3.3cm Package includes:
1x Solar Charge Controller
1x User Manual Payments Delivery details Return and exchange Feedback & Rating Contact us Payments Payments: Paypal, Google Pay, Visa, Master Card, Amerian Express, Discover. Delivery details All items are shipped from US warehouse located at NJ . We ship to your eBay or Paypal address. Please make sure your eBay or Paypal address is correct before you pay. Return and exchange Free return Feedback & Rating Pls contact our customer service firstly if have any problems , we will help to solve the issue, and could offer free return service for full refund or free replacement after confirming. You can buy from us with confidence Contact us If have any problems, please feel free to contact us.
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
