PWM MPPT Solar Panel Regulator Charge Controller Auto Focus Tracking

MPPT Solar Charge Controller  Product Features: MPPT solar charge controller: Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%. Automatic focusing MPPT tracking charging, high charging efficiency, non-stop detection during charging, bidirectional focusing tracking. Large-screen LCD display, adjustable charging and discharging parameters. This MPPT controller has perfect SOC function, control charge current, and supply power to the loads. Prevent the battery from over-charging, over-discharging and reverse charging to solar panels during nights. Others: 1. Always keep the battery on fill voltage condition. 2. Prevent the battery from over-charging. 3. Prevent the battery from over-discharging. 4. Prevent the battery from reverse charging to solar panels during nights. 5. Reverse Polarity Protection for Battery 6. Reverse Polarity Protection for Solar Panels 7. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working. 8. Thunder protection 9. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25℃ condition, locked by the CPU procedure, cannot adjust.) 10. The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature. Product Specification: Rated voltage ： 12/24V Rated current ： 30/60/100A Max. PV voltage： 50V Max. PV input power： 750W(12V) / 1500W(24V) Package Includes: 1 x MPPT Solar  Charge Controller 1 x User Manual ------------------------------------------------------ PWM Solar Charge Controller  Product Features: Build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Big LCD display, adjustable parameter. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery. Build-in short-circuit protection, open-circuit protection, reverse protection, over-load protection. Dual USB output, the maximum current of 2.5A, to support Apple mobile phone charging. Dual mosfet Reverse current protection, low heat production. Easy to set up and operate, suitable for home, industrial, commercial etc. Others: Size: Approx. 13.3 x 7 x 3.5 cm/ 5.24 x 2.76 x 1.38 inch (LxWxH) (10A, 20A and 30A models) Battery Voltage: 12V/ 24V (Auto recognition) Input Charging Current: 10A / 20A / 30A.dependent upon the model chosen. The maximum panel output current should be about 25% less than the controller's maximum input current rating. For example, with a single 6A 100W panel, use the 10A model. Two 6A panels (12A total) should use the 20A model. If in doubt, use the higher current model, i.e. if the maximum panel output current is 9A, use the 20A model rather than the 10A model. Maximum Discharge Current: 10A (10A, 20A and 30A models) Internal power consumption: =10mA Over Charge Protection: B01 Sealed: 14.4V/28.8V B02 Gel: 14.2V/28.4V B03 Flood: 14.6V/29.2V Over Charge Float: 13.7V/27.4V (Defaults, adjustable range 12.7-15V) Over-discharge Protection (Discharge Stop): 10.7V/21.4V (Defaults, adjustable range 9-11.3V) Over-discharge Recovery (Discharge Reconnect): 12.6V/25.2V (Defaults, adjustable range 11.5-13V) USB output: 5V/2A 12V batteries should be used with solar panels capable of generating 18V-25V With 12V batteries, the maximum panel voltage must not exceed 25V 24V batteries should be used with solar panels capable of generating 36V-50V With 24V batteries, the maximum panel voltage must not exceed 50V Maximum Power Input: 10A Model 12V: 120W (MAX),  24V: 240W (MAX) 20A Model 12V: 240W (MAX),  24V: 480W (MAX) 30A Model 12V: 360W (MAX),  24V: 720W (MAX) Operating Temperature: -35 ~ +60C Storage Temperature: -35 ~ +60C Product Specification: Type :  Solar Charge Controller Material  :  ABS Screen :  LCD display screen Battery Voltage  :  12V / 24V Charge Current  :  10A/20A/30A Working Temperature :   -35 to 60 degree Celsius Self consume :  10mA Float Charge :  13V Discharge stop :  10.7V Discharge reconnect :  12.6V USB output  :  5V/2.5A Application  :   Home, Industrial, Commercia Package Includes: As shown in the figure

Returns Accepted for this item if it's within 30 Days