ECO-WORTHY 30A/40A/60A 12V/24V/48V MPPT Solar Panel Regulator

Store Categories
Store Categories 60A MPPT 12V/24/36/48V Controller 40A MPPT 12V/24V Controller 60A MPPT 12V/24/36/48V Controller 【Wide Range of Input & Output】 Compatible with 12V ~ 48V DC input, it's able to handle maximum of 780W(12V)/3120W(48V) input solar array, and can draw maximum of 60A output current to battery bank. 【99% Efficient MPPT Technology】 Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%. It can keep a stable charging current even on cloudy days, making no waste of any sunlight. 【Compatible with All Kinds of Batteries】 It's able to charge and discharge different kinds of 12/24/36/48V battery banks, including Gel, AGM, Lithium, LiFePO4, Flooded and NCM/NCA batteries. 【OLED Screen for Real-time Monitoring】 Equipped with OLED screen, which can dispaly the status of PV voltage, battery voltage, charging current, charging power, and the button can be used to change the battery's type. 【Reliable Electronic Protections】 It has multiple protections to prevent those circuit issues, including Reverse Polarity, Short-Circuit, High Temperature, Over-Current, and Over-Voltage/Low-Voltage. Prevent explosions and fire conditions, keep the controller safe during working. 40A MPPT 12V/24V Controller 【SWITCH THE BATTERY TYPE】 It allows users to change the different battery charging types for safe and stable charging,including AGM. Gel, SLA, Flooded, Lithium, LiFeP04 modes. (Note: The lead-acid battery voltage will be auto detected) 【MONITOR THE CHARGING 】 The MPPT charge controller has an OLED display, which shows the real-time charging data. With backlight, those numbers can be observed clearly at night. 【TEMPERATURE COMPENSATION 】 With the included temperature sensor, the MPPT charge controller can measure battery temperature, and make a compensation that can keep the charging performance as in normal condition, assuring stable and constant charging 【FAST & SAFE CHARGING 】 The charge controller has different charging modes for different batteries. For lead-acid batteries, it has a 4-stage battery charging algorithm, for lithium-ion batteries, it has a 2-stage charging mode. 【ACTIVATE UNDER-VOLTAGE BATTERY 】 When the lithium battery is protected and shut down by the inner BMS, the charge controller can automatically reactivate it so that it can go back to its normal working state. 60A 12V/24V Controller 30A 12V/24V Controller 12A 48V/60V/72V Boost MPPT Controller 60A 12V/24V Controller 30A 12V/24V Controller 【30A Charge Controller】 The solar charge controller is compatible with 12V 24V systems. A built-in industrial microcontroller automatically manages the operation of the solar panels and batteries in the solar system. 30A charger with dual USB 5V/2.5A(Max) output, support mobile phone charging 【Multiple protection】 ECO-WORTHY solar controller has short circuit protection, open circuit protection, reverse polarity protection and overload protection. Full 3-level PWM charge management to improve system efficiency and extend battery life. [Battery Type] This charge controller is suitable for lead-acid/gel/liquid-sealed batteries and also supports lithium batteries. [LCD Monitor] With its own display screen, the status and data can be seen at a glance, and the mode and parameter configuration can be easily switched, which is suitable for home, industry, business, etc. [Easy to install and use] The charge controller should be connected to the battery first, then the solar panel, and finally the load! The disassembly sequence contradicts the wiring sequence. 12A 48V/60V/72V Boost MPPT Controller Service Shipping Warranty Return About us Service Shipping Warranty Return About us Store Categories
Store Categories Related sales 12V/24V/48V 50AH 100AH 200AH Lithium Battery                                                                  Solar Tracking System （Supports 6pcs solar panels）                                                                

1200W Solar Power System & 2*100AH Lithium Battery

60A MPPT 12V/24/36/48V Controller 40A MPPT 12V/24V Controller 60A MPPT 12V/24/36/48V Controller 【Wide Range of Input & Output】 Compatible with 12V ~ 48V DC input, it's able to handle maximum of 780W(12V)/3120W(48V) input solar array, and can draw maximum of 60A output current to battery bank. 【99% Efficient MPPT Technology】 Maximum Power Point Tracking technology with a high tracking efficiency of up to 99% and peak conversion efficiency of 98%. It can keep a stable charging current even on cloudy days, making no waste of any sunlight. 【Compatible with All Kinds of Batteries】 It's able to charge and discharge different kinds of 12/24/36/48V battery banks, including Gel, AGM, Lithium, LiFePO4, Flooded and NCM/NCA batteries. 【OLED Screen for Real-time Monitoring】 Equipped with OLED screen, which can dispaly the status of PV voltage, battery voltage, charging current, charging power, and the button can be used to change the battery's type. 【Reliable Electronic Protections】 It has multiple protections to prevent those circuit issues, including Reverse Polarity, Short-Circuit, High Temperature, Over-Current, and Over-Voltage/Low-Voltage. Prevent explosions and fire conditions, keep the controller safe during working. 40A MPPT 12V/24V Controller 【SWITCH THE BATTERY TYPE】 It allows users to change the different battery charging types for safe and stable charging,including AGM. Gel, SLA, Flooded, Lithium, LiFeP04 modes. (Note: The lead-acid battery voltage will be auto detected) 【MONITOR THE CHARGING 】 The MPPT charge controller has an OLED display, which shows the real-time charging data. With backlight, those numbers can be observed clearly at night. 【TEMPERATURE COMPENSATION 】 With the included temperature sensor, the MPPT charge controller can measure battery temperature, and make a compensation that can keep the charging performance as in normal condition, assuring stable and constant charging 【FAST & SAFE CHARGING 】 The charge controller has different charging modes for different batteries. For lead-acid batteries, it has a 4-stage battery charging algorithm, for lithium-ion batteries, it has a 2-stage charging mode. 【ACTIVATE UNDER-VOLTAGE BATTERY 】 When the lithium battery is protected and shut down by the inner BMS, the charge controller can automatically reactivate it so that it can go back to its normal working state. 60A 12V/24V Controller 30A 12V/24V Controller 12A 48V/60V/72V Boost MPPT Controller 60A 12V/24V Controller 30A 12V/24V Controller 【30A Charge Controller】 The solar charge controller is compatible with 12V 24V systems. A built-in industrial microcontroller automatically manages the operation of the solar panels and batteries in the solar system. 30A charger with dual USB 5V/2.5A(Max) output, support mobile phone charging 【Multiple protection】 ECO-WORTHY solar controller has short circuit protection, open circuit protection, reverse polarity protection and overload protection. Full 3-level PWM charge management to improve system efficiency and extend battery life. [Battery Type] This charge controller is suitable for lead-acid/gel/liquid-sealed batteries and also supports lithium batteries. [LCD Monitor] With its own display screen, the status and data can be seen at a glance, and the mode and parameter configuration can be easily switched, which is suitable for home, industry, business, etc. [Easy to install and use] The charge controller should be connected to the battery first, then the solar panel, and finally the load! The disassembly sequence contradicts the wiring sequence. 12A 48V/60V/72V Boost MPPT Controller Service Shipping Warranty Return About us Service Shipping Warranty Return About us On Aug 28, 2023 at 03:56:25 PDT, seller added the following information:

Returns Accepted for this item if it's within 30 Days