Eco-worthy Roof Solar Panel Mount Bracket Kit(for 1-4 Pcs Solar Panels

Feature 1. Easy installation: no long metal guide rail is needed as a base 2. Affordable: 50% cheaper than ordinary roof mounting brackets 3. High strength: can withstand severe weather conditions, such as wind load up to 60m/s, snow load up to 1.4kn/m² 4. Suitable for roofs of various materials, suitable for irregular flat roofs Features Better heat dissipation Wide range of applications Long service life Strong bearing capacity How to install ？ 1.Drill a hole in the right position as planned，install the EPDM rubber and l-bracket then screw the bolt into the wooden the steel below 2.Section of L-bracket after installation. Please be careful during installation，not destroy the steel below 3.Mount the clamp and L-shaped bracket to the roof rail. 4.Confirm and tighten the bolts 5. both rails must be on the same level 6.The module is secured to the roof rail by end clamps. 7.AS shown on the right, First, solar panel should is placed flat on the rail, then the rail clip is snapped into the rail slot and finally end clamp kit is installed. 8.Portrait solar panel No x solar panel length（should the check the solar panel install） 9. Landscape solar panel No. X( solar panel width +18mm ）+32mm 10. L-bracket horizontal spacing can be up to 2m 11.L-bracket upward spacing is about 1/2 or 3/4 the length of solar panel 11.Spacing between solar panels： 18mm Package Include On Aug-11-20 at 14:08:10 PDT, seller added the following information:

Returns Accepted for this item if it's within 30 Days