Heliocol Panel Clamp Assembly For Swimming Pool Solar Panels

Panel Clamp Assembly Patented panel clamp connection design eliminates the need for traditional rubber hose connections that deteriorate over time requiring maintenance and replacement. This low-profile connection style also drastically improves aesthetics, producing a cleaner, more attractive appearance. Makes header-to-header panel connections. Allows attachment of end caps and pipe connectors to the header. (2-Pack) Panel Clamp Assembly Includes: (2) PPC, Panel Clamp Bottom (2) PPC, Panel Clamp Top (2) PPC, Panel Clamp Latch w/ Locking Clip (2) PPC, Panel Clamp Gasket PRODUCT DATA Manufacturer: Magen eco-Energy MPN: 2-1810-004 Old Part #: HC-113 Compatibility : Heliocol, SwimJoy, SwimLux, SunStar and eco-SPARK solar pool heating panels. About Us Our mission is to provide an outstanding customer experience from start to finish. We pride ourselves on achieving and maintaining one of the leading customer support staffs in the industry. Our team of dedicated experts are available to assist with any questions you have, at any point in your project. We offer design & consultation services free of charge, simply give us a call or send us a message. Our primary objective is to help you identify the best possible solar solution that will achieve your heating goals, while also providing the best possible fit to your roof type and climate. WE CARRY ONLY THE INDUSTRIES MOST TRUSTED BRANDS , each paired with extensive warranty coverages. If you purchase from Solar Pool Supply, you can rest assured that you have purchased a premium quality system that has been designed to perform at the highest level and last 15-25 years! Here is a list of a few of the items we provide to our customers on a daily basis; Free technical support from a professional installer, capable of walking you through ANY aspect of your installation - we are here for the long haul, whether its during your install, or years later. Advanced design and layout services. Want to make sure your system is optimized for your climate, roof & heating goals? Let us Help! Plumbing design & tie-in assistance. Design & performance optimization. Balancing flow rates. Pump sizing & speed considerations. Multiple bank systems. Ground rack designs. Metal roofs, tile roofs, pergolas, ext. Achieving proper automatic gravity drainage. Winterizing systems in cold weather climates. Automation units, heat pumps, ext. At Solar Pool Supply, we are constantly seeking new and inventive ways of pioneering previously untouched challenges in the solar pool heating industry. We began with a renovation of the DIY market by custom packaging the industries leading brands into complete "do it yourself" kits for inground swimming pools. Systems of this caliber had previously only been available to select areas of the country by a professional installer. We have come a long way and have succeeded in making it possible for a homeowner anywhere in the world to have access to these very same systems, all without the need of a contract! Other Items To Consider PRIMARY SYSTEM COMPONENTS The items listed below are generally required if you are installing a full solar pool heating system (new or replacement system). If you are simply replacing a couple old/damaged panels within an existing array, see "Repair & Replacement Components". SwimJoy Panel Kit: Contains the parts necessary for installing a SwimJoy solar pool panel to a supporting surface and making water connections from one panel to another. One (1) panel kit is required for each solar panel in the array. Each SwimJoy Panel Kit contains; (2) Mounting Pad, Top Header (2) Mounting Pad, Bottom Header (2) PPC, Panel Clamp Assembly Heliocol Panel Kit: Contains the parts necessary for installing a Heliocol solar pool panel to a supporting surface and making water connections from one panel to another. One (1) panel kit is required for each solar panel in the array. Each Heliocol Panel Kit contains; (2) Gator Clamp, Top Header (Short) (2) Gator Clamp, Bottom Header (Long) (8) Gator Clamp Screw (2) PPC, Panel Clamp Assembly Row Kit:  Contains the parts necessary for making water connections from a row of solar pool heating panels to the systems supply and return plumbing lines. One (1) row kit is required for each row (bank) of solar pool heating panels in the array. If you are installing your panels in multiple rows, you will need one row kit per row of panels. Compatible with Heliocol, SwimJoy, SwimLux, SunStar and eco-SPARK solar pool heaters. Each Row Kit contains; (2) PPC, Panel Clamp Assembly (2) End Cap (2) Pipe Connector, CPVC Vacuum Relief Valve Attachment Set:  Contains the parts necessary to aid in gravity drainage of the panels and piping. One (1) set is required for each system. Compatible with Heliocol, SwimJoy, SwimLux, SunStar and eco-SPARK solar pool heaters. Each Vacuum Relief Valve Attachment Set contains ; (1) Vacuum Relief Valve, 3/4" MPT (1) Reducer Bushing, Spigot X FPT, 2" X 0.75" (1) PVC Pipe Fitting, Tee, Slip X Slip X Slip, White, 2" SUPPLEMENTAL COMPONENTS The items listed below MAY be needed in addition to the items above if you are installing a new system from scratch (do not have a pre-existing solar pool heater), OR have specific installation requirements due to available roof spacing (i.e: if you need to split the panels into multiple rows or need to bypass an obstruction like a roof or skylight). We also have supplemental high-wind add-on kits available for those living in high-wind/storm climates and need additional mounting security. Manual Temperature Control Plumbing Kit : Contains the valve’s necessary for manual temperature control of your solar pool heating system. A 3-port diverter valve is manually adjusted to turn solar on and off. Two isolation valves are used to completely shut off solar for maintenance and winterization (prevents water from entering the solar panels). The check valve is used to prevent water from flowing backwards through your pump & filter. Includes premium Pentair lube-free valve’s, 2″-2.5″ CPVC. https://www.Pricetronic.com/itm/373154726951 E ach manual temperature control plumbing kit contains ; (1) Pentair 3-Port Solar Valve w/ Drain Down, CPVC, 2″-2.5″ (1) Pentair 2-Port Check Valve, CPVC, 2″-2.5″ (2) Pentair 2-Port Isolation Valve, Positive Seal, CPVC, 2″-2.5″ SwimJoy High-Wind Add-On Panel Kit: Recommended for installation sites with frequent high-wind or storm weather conditions. Supplemental high-wind panel kits are used in conjunction with standard panel kits to provide the parts necessary to secure each of SwimJoy's 8 mounting rails (4-top & 4-bottom) to the installation surface. Features extra-wide top header mounting pads and additional bottom mounting pads for maximum security. One (1) high-wind add-on panel kit is required for each solar panel in the array. Each SwimJoy High-Wind Add-On Panel Kit contains; (4) Extra-Wide Top Mounting Pads (2) Bottom Mounting Pads Row Spacer Kit:  Contains the parts necessary to bypass mounting surface obstructions larger than 6" such as roof vents, skylights and exhaust fans. Allows the connection of PVC pipe between the panels to provide proper clearance of the obstruction. One (1) Row Spacer Kit is required for each split in a row of solar panels. Compatible with Heliocol, SwimJoy, SwimLux, SunStar and eco-SPARK solar pool heaters. Each Row Spacer Kit contains; (4) Pipe Connector, CPVC (2) PPC, Panel Clamp Assembly PVC Pipe Support Bracket :  Optional component used for supporting feed and return line PVC piping on the roof or other mounting surfaces. Each bracket includes a specialized wedge attachment that allows for the natural expansion and contraction of the pipe as it heats up and cools down. Includes flashing base to support lag bolt attachment to the mounting surface and provide enhanced seal. Also used to create a low-profile, aesthetically pleasing installation. Black: White: REPAIR & REPLACEMENT COMPONENTS The items listed below are used if you are replacing old/damaged panels within an existing array, or need to repair damaged or leaking solar panels or hardware components. Panel Clamp Assembly: Patented panel clamp connection design eliminates the need for traditional rubber hose connections that deteriorate over time, requiring regular maintenance and replacement. This low-profile connection style also drastically improves the aesthetics of installations; producing a cleaner, more attractive system. Compatible with Heliocol, SwimJoy, SwimLux, SunStar and eco-SPARK solar pool heaters. Makes header-to-header panel connections without any gap (panels connect directly next to each other) . Used to make attachments with end caps & pipe connectors. Pipe Connector: Used to attach PVC Pipe to the solar pool heating system. This is generally done at the supply and return connection points, however it can also be done to space out panels around larger roof obstructions (see row spacer kit). Pipe connectors attach the header of a solar panel (via panel clamp assembly) to either a PVC coupling, or directly to PVC pipe (depending on pipe size). Compatible with Heliocol, SwimJoy, SwimLux, SunStar and eco-SPARK solar pool heaters. 2” SCH40 PVC Pipe connects with a PVC coupling (not included) . 1.5” SCH40 PVC Pipe is slip fit directly into pipe connector. End Cap: Used to cap off the end of a solar pool heating system array (bank/row of panels) . For most applications, one (1) is used on the end opposite the supply connection, and one (1) is used on the end opposite the return connection. Attaches to the panel header via panel clamp assembly. Compatible with Heliocol, SwimJoy, SwimLux, SunStar and eco-SPARK solar pool heaters. Vacuum Relief Valve: Allows air to enter the solar pool heating system when the pool pump shuts off to facilitate automatic gravity drainage of the panels and pipe. This is an extremely important aspect of solar pool heating systems to prevent freeze damage, as well as keep air from stagnating within the panels and piping. Compatible with Heliocol, SwimJoy, SwimLux, SunStar and eco-SPARK solar pool heaters. Allows for automatic gravity drainage of the panels and piping ( system must be installed in a manner which allows for this functionality. Contact us if you have any questions or need assistance with your layout ). Prevents freeze damage and keeps air from stagnating. Prevents damage to the solar pool heating system by allowing air to enter the system when the pump shuts off, preventing the formation of a vacuum. Solar Panel Repair Tool Kit: Includes all the necessary tools and plugs to repair SwimJoy or Heliocol solar pool heater panels with damaged riser tubes. Maintains the uniform appearance of the panel. SwimJoy:   Heliocol:   Includes chisel, plug insertion tool & 12 repair plugs. (2) plugs are required for each riser tube repair; (1) at the top & (1) at the bottom. Repair Plugs: Replacement plug pack, used to repair SwimJoy or Heliocol solar pool heater panels with damaged riser tubes. Maintains the uniform appearance of the panel. SwimJoy:   Heliocol:   (2) plugs are required for each riser tube repair; (1) at the top & (1) at the bottom.

Returns Accepted for this item if it's within 30 Days