MidNite Solar - 250 Amp 125Vdc DC Panel Mount Breaker MNEDC 250 - FREE

MidNite Solar - 250 Amp  125Vdc DC Panel Mount Circuit Breaker MNEDC 250 MNEDC-250 MNEDC250 These breakers are much larger than the smaller MNEDC series Midnite Solar breakers.  They are often used as the breaker/switch connection between the positive connection of an off grid inverter and a battery bank.  These breakers are specially designed with a delay to prevent nuisance tripping during high surge loads often encountered with off grid inverters. These breakers are the same specifications as the OutBack Power PNL-250-DC breakers. Although these breakers have the same electrical specifications as the Mangnum Energy 250 amp breakers, they have a different stud terminal mount configuration that exits the back side of the breaker instead of the ends.  Because of this difference, we do not suggest these for use in a Magnum branded Inverter panels but they can be used for Magnum inverters that are used with other connection boxes such as the Midnite Solar brand E-Panels. See listing photos for detailed breaker dimensions including the mounting hole size and mounting screw spacing.

125VDC Panel Mount Breaker - 3/8" studs 1.5" Width

AIC 50,000 at 125VDC

Breaker Terminal Torque Value: 15 Ft-Lbs (20.4NM)

Environmental Rating - Type 1 (Indoor)

Listed for US & Canada

MidNite’s breakers are rated to break the full rated load at the rated voltage repeatedly, with NO DAMAGE. 

Always use a properly sized breaker for disconnecting. 

All MidNite circuit breakers can be used at 100% rated current when mounted in a MidNite enclosure.

Item will normally ship within 12-24 hours or less after cleared payment. Free USPS Priority Mail Shipping Delivers your purchase USUALLY in 2-4 days after shipment to any of the 50 United States of America OR IT"S PROVINCES!

Returns Accepted for this item if it's within 30 Days