SOLAR PANEL JUNCTION BOX 15 AMP DIODES, WIRES,WIRE CONNECTORS

HEART OF THE SUN-SOLAR Sells  many items needed to build your own solar panels, solar cells, junction boxes, tabbing wire, buss wire, solder, soldering irons,  rosin flux pens, wire  connectors, and more.  visit my store for  a complete list. Not sure what you need send me a question and some details. Brian 

Simply solder your Buss wire from your panel into the easy to get to  tabs on the junction box then snap  the lid on.  

The tabs  on the junction box are pre-soldered for easily soldering the Buss wire.

Use 100% silicone to seal your junction box to your panel.

A small flat screwdriver will remove the junction box lid. THE LID WILL COME BACK OFF BUT I FOUND IT A LITTLE DIFFICULT ONLY PUT THE LID ON WHEN YOU ARE SURE YOU ARE DONE. 

The cables are marked with a (+)  + ( - )  sticker for easily identifying  the cables. 

Standard 4mm wire ( 12 AWG) 

Cable length  35 inches (  90 mm)  to end of connector.

4 RAIL 3 DIODES  SOLAR JUNCTION BOXES ARE MADE FOR PANELS WITH 4  BUSS BARS OF WIRE  COMING OUT OF THE BACK

Can also be used  on any diy panel with just 2  buss bars coming out.  simply attach the  left rail to the neg(-) buss  wire, and the right hand rail to the  pos(+) buss wire.

WMax Voltage:1000V

Junction box Current:3-15A

Temperature Range:-40~+85 

waterproof:IP68

Flame class:UL94V-0

Box material:PPO

Joining of ribbon:soldering

Product No.DLC608Amount of rails4rail terminalsRated VoltageTUV 1000V DCRating current8ACable size4.0mmPin OD:4.0mmProof voltage:TUV 6000V AC(1Min) / UL 2200V DC (1Min)Pollution degree:2Protection class:Class IIContact Material:Copper, tin platedContact resistance:≤5mΩProtection degree:IP 68Withdrawal Force:≥50NTemperature Range:-40~+85Flame Class:UL94V-0