Uni-Solar PVL-24 5V 24W Flexible 3-Foot Solar Panel w/ Solder Points -
No CablesUSD $38.94
Condition : Open box
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Uni-Solar PVL-24 5V 24W Flexible 3-Foot Solar Panel w/ Solder Points - No Cables
Uni-Solar PVL-24 5V 24W Flexible Amorphous 3-Foot Long Solar Panel Battery Charger. Combine 3 of these panels in series to increase voltage for charging 12 Volt Batteries. We include free MC3 Cables and Junction box for DIY installations.
Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with manufacturer's guidelines.
Designed for 5V USB voltage charging (No USB port Included). Combine multiple panels to increase voltage as needed for various battery configurations. Small form factor for custom Vehicle solar charging. These 36 inch long 3 cell panels are the shortest PVL Series panels Unisolar Made allowing multiple panels to be connected to fit small roof surface applications such as Golf Carts, VW Vans and Experimental Electric Vehicles. Panels are roll-able to about 6 inches in diameter to take hiking and backpacking.
Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18" x 2" metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent. Electrical Stats:Maximum Power (Pmax): 24 Watts Nominal Operating Voltage: 5 Volts (approximately) Max Power Voltage (Vmpp): 4.6 Volts Max Power Current (Impp): 5.2 Amps Open Circuit Voltage (Voc): 6.1 Volts Physical Stats: Panel Dimensions (Feet): 3 long x 1.29 wide Panel Dimensions (Inches): 36 long x 15.5 wide x 0.2 thick Panel Weight: 2.75 Pounds Electrical Connectors: None: Solder Points on top of panel Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate
Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost - usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples.
UNISOLAR PVL-24 Solar Power Amorphous Flexible PV Panels - YouTube
Video will open in a new window [isdntekvideo] Condition: Open Box This new open box panel has top-facing solder points for connections above the panel. When 3 of these panels are combined in series they will produce a good voltage for charging 12 Volt Batteries. We include a DIY Junction Box with every panel sold, but other components may be needed depending on the desired setup, such as short wires to connect the solder points to the j-box, and/or a sealant to connect the j-box securely to the panel. It is 3 feet long by 15.5 inches wide. Please view our photo set and contact us if you have any questions.
CLICK BELOW FOR MORE SOLAR OPTIONS
Shipping
Best Offers
Returns
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA. Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you. All items are shipped from our warehouse in Ventura, CA USA.
We have IMMEDIATE PAYMENT
required on many of our listings, so if you'd like to make an OFFER
on this item and you do not see a MAKE OFFER
button, please use the CONTACT SELLER
link at top right under our username. 30-DAY SATISFACTION GUARANTEE
-Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
30
Days Money Back Guarantee
Customer Satisfaction is Our Top Priority!
Satisfaction
Guaranteed
Fast Shipping
Customer Support Click here to see description
Uni-Solar PVL-24 5V 24W Flexible 3-Foot Solar Panel w/ Solder Points - No Cables
Uni-Solar PVL-24 5V 24W Flexible Amorphous 3-Foot Long Solar Panel Battery Charger. Combine 3 of these panels in series to increase voltage for charging 12 Volt Batteries. We include free MC3 Cables and Junction box for DIY installations.
Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with manufacturer's guidelines.
Designed for 5V USB voltage charging (No USB port Included). Combine multiple panels to increase voltage as needed for various battery configurations. Small form factor for custom Vehicle solar charging. These 36 inch long 3 cell panels are the shortest PVL Series panels Unisolar Made allowing multiple panels to be connected to fit small roof surface applications such as Golf Carts, VW Vans and Experimental Electric Vehicles. Panels are roll-able to about 6 inches in diameter to take hiking and backpacking.
Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18" x 2" metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent. Electrical Stats:Maximum Power (Pmax): 24 Watts Nominal Operating Voltage: 5 Volts (approximately) Max Power Voltage (Vmpp): 4.6 Volts Max Power Current (Impp): 5.2 Amps Open Circuit Voltage (Voc): 6.1 Volts Physical Stats: Panel Dimensions (Feet): 3 long x 1.29 wide Panel Dimensions (Inches): 36 long x 15.5 wide x 0.2 thick Panel Weight: 2.75 Pounds Electrical Connectors: None: Solder Points on top of panel Features: Lightweight & Flexible Easy Peel & Stick Application Virtually Unbreakable (No Glass) Shadow & High Heat Tolerant Frame Material: Frameless Bonding adhesive factory-installed on the back of the laminate
Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost - usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples.
UNISOLAR PVL-24 Solar Power Amorphous Flexible PV Panels - YouTube
Video will open in a new window [isdntekvideo] Condition: Open Box This new open box panel has top-facing solder points for connections above the panel. When 3 of these panels are combined in series they will produce a good voltage for charging 12 Volt Batteries. We include a DIY Junction Box with every panel sold, but other components may be needed depending on the desired setup, such as short wires to connect the solder points to the j-box, and/or a sealant to connect the j-box securely to the panel. It is 3 feet long by 15.5 inches wide. Please view our photo set and contact us if you have any questions.
CLICK BELOW FOR MORE SOLAR OPTIONS
We have IMMEDIATE PAYMENT
required on many of our listings, so if you'd like to make an OFFER
on this item and you do not see a MAKE OFFER
button, please use the CONTACT SELLER
link at top right under our username.
Shipping
Returns
Best Offers 30-DAY SATISFACTION GUARANTEE
-Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA. Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you. All items are shipped from our warehouse in Ventura, CA USA.
30
Days Money Back Guarantee
Customer Satisfaction is Our Top Priority!
Customer Support
Satisfaction
Guaranteed
Fast Shipping On May 21, 2023 at 20:06:12 PDT, seller added the following information:
Uni-Solar PVL-24 5V 24W Flexible Amorphous 3-Foot Long Solar Panel Battery Charger. Combine 3 of these panels in series to increase voltage for charging 12 Volt Batteries. We include free MC3 Cables and Junction box for DIY installations.
Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with manufacturer's guidelines.
Designed for 5V USB voltage charging (No USB port Included). Combine multiple panels to increase voltage as needed for various battery configurations. Small form factor for custom Vehicle solar charging. These 36 inch long 3 cell panels are the shortest PVL Series panels Unisolar Made allowing multiple panels to be connected to fit small roof surface applications such as Golf Carts, VW Vans and Experimental Electric Vehicles. Panels are roll-able to about 6 inches in diameter to take hiking and backpacking.
Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18" x 2" metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent. Electrical Stats:
Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost - usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples.
UNISOLAR PVL-24 Solar Power Amorphous Flexible PV Panels - YouTube
Video will open in a new window [isdntekvideo] Condition: Open Box This new open box panel has top-facing solder points for connections above the panel. When 3 of these panels are combined in series they will produce a good voltage for charging 12 Volt Batteries. We include a DIY Junction Box with every panel sold, but other components may be needed depending on the desired setup, such as short wires to connect the solder points to the j-box, and/or a sealant to connect the j-box securely to the panel. It is 3 feet long by 15.5 inches wide. Please view our photo set and contact us if you have any questions.
CLICK BELOW FOR MORE SOLAR OPTIONS
Shipping
Best Offers
Returns
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA. Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you. All items are shipped from our warehouse in Ventura, CA USA.
We have IMMEDIATE PAYMENT
required on many of our listings, so if you'd like to make an OFFER
on this item and you do not see a MAKE OFFER
button, please use the CONTACT SELLER
link at top right under our username. 30-DAY SATISFACTION GUARANTEE
-Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
30
Days Money Back Guarantee
Customer Satisfaction is Our Top Priority!
Satisfaction
Guaranteed
Fast Shipping
Customer Support Click here to see description
Uni-Solar PVL-24 5V 24W Flexible 3-Foot Solar Panel w/ Solder Points - No Cables
Uni-Solar PVL-24 5V 24W Flexible Amorphous 3-Foot Long Solar Panel Battery Charger. Combine 3 of these panels in series to increase voltage for charging 12 Volt Batteries. We include free MC3 Cables and Junction box for DIY installations.
Category 3 (130 MPH) Hurricane uplift resistant when installed in accordance with manufacturer's guidelines.
Designed for 5V USB voltage charging (No USB port Included). Combine multiple panels to increase voltage as needed for various battery configurations. Small form factor for custom Vehicle solar charging. These 36 inch long 3 cell panels are the shortest PVL Series panels Unisolar Made allowing multiple panels to be connected to fit small roof surface applications such as Golf Carts, VW Vans and Experimental Electric Vehicles. Panels are roll-able to about 6 inches in diameter to take hiking and backpacking.
Previous customers have reported installing these panels on their corrugated metal roofs by attaching 18" x 2" metal strips every few feet on the sticky backing, leaving the white covering for the sticky backing intact where the metal strips are not present (saving the sticky material for other projects in case the panel is moved later). They then drove self-tapping screws through the protruding ends of the metal strips onto their metal roof, sealed with a proper caulk. This allowed them to install the panel with its built-in sticky backing and yet keep the installation non-permanent. Electrical Stats:
Uni-Solar panels are lightweight, flexible and directly adhere to many roofing surfaces avoiding penetrations. Each cell is connected to each other via bypass diodes. Therefore, if one cell is shaded or soiled, only the power output of this one shaded cell is lost - usually less than 4.5%.These panels are less than 1/5th the weight of crystalline solar panels and are designed for membrane and metal roofing system applications. Here is a video with many examples.
UNISOLAR PVL-24 Solar Power Amorphous Flexible PV Panels - YouTube
Video will open in a new window [isdntekvideo] Condition: Open Box This new open box panel has top-facing solder points for connections above the panel. When 3 of these panels are combined in series they will produce a good voltage for charging 12 Volt Batteries. We include a DIY Junction Box with every panel sold, but other components may be needed depending on the desired setup, such as short wires to connect the solder points to the j-box, and/or a sealant to connect the j-box securely to the panel. It is 3 feet long by 15.5 inches wide. Please view our photo set and contact us if you have any questions.
CLICK BELOW FOR MORE SOLAR OPTIONS
We have IMMEDIATE PAYMENT
required on many of our listings, so if you'd like to make an OFFER
on this item and you do not see a MAKE OFFER
button, please use the CONTACT SELLER
link at top right under our username.
Shipping
Returns
Best Offers 30-DAY SATISFACTION GUARANTEE
-Contact us with any questions or concerns and we will make it right. Our customers are our highest priority. If you are not completely satisfied with your purchase, please contact us within 30 days of your purchase and we will refund 100% of your purchase price. Returns must include all original undamaged items, in resalable condition with all original packaging (including manuals, and accessories). Media, Books, and Software are non-refundable. Shipping and Handling fees are non-refundable and the buyer is responsible for return item shipping costs.
We ship by most standard carriers and also offer local pick-up at our warehouse in Ventura, CA. Please be sure to include a street address (not a PO Box) for any method other that US Postal Service.
Large and heavy items ship by palletized freight and are delivered to the nearest truck freight terminal (for US lower 49 orders) or the nearest ocean freight seaport terminal (for International orders). Buyer must collect the goods at the terminal or make arrangements for onward delivery from that location.
International shipping rates do not include taxes, tariffs, customs, or duties unless otherwise noted.
If you do not see a rate in this listing please contact us and provide your ship to City and State or Country and we'll research it for you. All items are shipped from our warehouse in Ventura, CA USA.
30
Days Money Back Guarantee
Customer Satisfaction is Our Top Priority!
Customer Support
Satisfaction
Guaranteed
Fast Shipping On May 21, 2023 at 20:06:12 PDT, seller added the following information:
Returns Accepted for this item if it's within 30 Days
Price type
IN STOCK
OUT STOCK
.
